By A Mystery Man Writer
The Unistrut P2785 Beam Clamp is used to mount Unistrut Channel to beams with flanges up to 3/4" (19.1 mm). Use with Unistrut P1000, P1100, P2000, P3000, P3300, P3301, P4000, P4001, P4100 and P4101 Channels. Two 3/8" hex nuts and u-bolt included. Electrog
The Unistrut P2785 Beam Clamp is used to mount Unistrut Channel to beams with flanges up to 3/4 (19.1 mm). Use with Unistrut P1000, P1100, P2000, P3000, P3300, P3301, P4000, P4001, P4100 and P4101 Channels. Two 3/8 hex nuts and u-bolt included. Electrogalvanized finish. Design Load: 1000 lbs each. Price is per each. Use in pairs only.
UNISTRUT CORP P2785-EG Beam Clamps, Channel
Unistrut P2785 EG Box of 25 Beam Clamps
Unistrut P2785 P2786 P2787 Beam Clamp
Unistrut P2785 - Beam Clamp
Unistrut P2785, Beam Clamp U-Bolt 86mm Hot Dipped Galvanised [Pack=25]
Unistrut Beam Clamp Submittal Data Sheets
Unistrut P2785 EG U Bolt Beam Clamp - P2785-EG
P2785-EG 3 x 3-3/8, 1000 Lb Load, Hot Rolled Pickled and Oiled, Electrogalvanized, Steel, 1-U, Beam Clamp
Unistrut Beam Clamp
Superstrut Channel to Beam Strut Clamp with U-Bolt - Silver Galvanized ZU501EG-10 - The Home Depot